Paging Access-Ccis - NEC UNIVERGE SV9300 Networking Manual

PAGING ACCESS-CCIS

General Description
This feature provides dial access to paging equipment from an Attendant Console or station, through the
CCIS network. For details of the programming, refer to External Paging with Meet-Me of Programming
Manual.
Programming
START
CM05 Assign a Unit and Slot number to the DLC
blade.
NOTE:
CM10 Assign the station number connected to
PGD(2)-U10 ADP to its associated Physical
Port number.
CM13 For the station connected to PGD(2)-U10
ADP, set the Message Waiting/Stored Call
Record lamps not to be lit.
For the station connected to PGD(2)-U10
ADP, set the call history not to be stored when
answering a station call.
For the station connected to PGD(2)-U10
ADP, set the call history not to be stored when
handling an unanswered station call.
A
DESCRIPTION
BLADE RESET
When the PGD(2)-U10 ADP is
accommodated to the Remote Unit,
execute the system data copy by
CMEC Y=8 before executing the
blade reset.
• Y=0
(1) XX ZZ
XX: 01-50: Unit No.
ZZ : 01-18: Slot No.
(2) 10: DLC blade
• Y=00
(1) XX YY ZZ: Physical Port No.
XX: 01-50: Unit No.
YY: 01-18: Slot No.
ZZ : 01-16: Circuit No.
(2) FX-FXXXXXXXX: Station No.
• Y=03
(1) X-XXXXXXXX: Station No.
(2) 1: Not provided
• Y=41
(1) X-XXXXXXXX: Station No.
(2) 1: Not stored
• Y=49
(1) X-XXXXXXXX: Station No.
(2) 1: Not stored
1-209
Chapter 1 CCIS FEATURES
PAGING ACCESS-CCIS
DATA
NWA-088654-001 Rev.1.0
94ch1006.fm