Section 6 Programming Names And Text Messages; Section 7 Using Softkeys For Programming; Section 8 System Number Plan/Capacities - NEC SL1000 Programming Manual

SL1000
S 6 PROGRAMMING NAMES AND TEXT MESSAGES
ECTION
Several programs (e.g., Program 20-16 : Selectable Display Messages) require you to enter text. Use
the following chart when entering and editing text. When using the keypad digits, press the key once
for the first character, twice for the second character, etc. For example, to enter a C, press the key 2
three times. Press the key six times to display the lower case letter. The name can be up to 12 digits
long.
Use this keypad digit . . .
1
2
3
4
5
6
7
8
9
0
*
#
Clear/Back
Flash
S 7 USING SOFTKEYS FOR PROGRAMMING
ECTION
Each SL1000 Display telephone withSoftkeys provides interactive Softkeys for intuitive feature access.
The options for these keys will automatically change depending on where you are in the system
programming. Simply press the Softkey located below the option you wish and the display will change
accordingly.
Pressing the Cursor key Up or Down will scroll between the menus.
S 8 SYSTEM NUMBER PLAN/CAPACITIES
ECTION
e following table provides the capacities for the SL1000 system.
System Type
System
1-4
Table 1-2 Keys for Entering Names
Enter characters:
Enter characters: A-C, a-c, 2
Enter characters: D-F, d-f, 3
Enter characters: G-I, g-i, 4
Enter characters: J-L, j-l, 5
Enter characters: M-O, m-o, 6
Enter characters: P-S, p-s, 7
Enter characters: T-V, t-v, 8
Enter characters: W-Z, w-z, 9
Enter characters:
Enter characters:
# = Accepts an entry (only required if two letters on the same key are needed - ex:
TOM ). Pressing # again = Space. (In system programming mode, use the right arrow
Softkey instead to accept and/or add a space. )
Clear the character entry one character at a time.
Clear all the entries from the point of the flashing cursor and to the right.
Table 1-3 System Number Plan/Capacities
System Number Plan/Capacities
Number Plan/Capacities
When you want to. . .
.
.
.
.
.
.
.
.
Issue 0.1
Related Pro-
gram
Introduction