Automatic Channel Scan; Manual Channel Scan - Grundig GUSTB160IV Instruction Manual

AUTOMATIC CHANNEL SCAN

It is recommended to use the
automatic search if several
channels in your channel list are
no longer being broadcast or if
new channels have become
available. The automatic search
will create a new channel list out
of all available channels and
replace the previous channel
list. As it searches every
available channel, the process may take several minutes to complete.
Automatic channel scan is activated by pressing OK when the Automatic Channel Scan option is
highlighted. A pop-up menu is shown on the screen, select "YES" to start. All the multiplexes are
searched and a channel table is created automatically. All channels found are stored in a sorted form
with respect to their channel numbers. To cancel the scan select "NO" from the pop-up menu.

MANUAL CHANNEL SCAN

The manual search is quicker as the channel number for the multiplex has to be specified and
therefore the DTR only has to tune into the one channel to find stations. However the channel
numbers must be known before attempting this method and therefore this is only designed for more
advanced users. In manual search the UHF channel number of the multiplex is entered manually
and only that multiplex is searched for the channels. In manual and auto search, any existing
channel in the database is not re-stored to avoid redundant duplicates of that channel. To start
the scan enter the channel number manually and press OK.
14