Table of Contents
Advertisement
3 Menu Operation
3.1 Startup
Proper startup is crucial to expand the life of NVR. It is HIGHLY
recommended to use an uninterruptible Power Supply (UPS) with
the device.
Plug power supply into an electrical outlet.
Press the power button (certain models may have power
button on the front or rear panel). The device begins to start.
Activate Device
No operation is allowed before activation. For the first-time access,
it requires to set an admin password for device activation. You can
also activate the device via web browser or IP-Finder.
Enter the same password in New Password and Confirm
Password.
STRONG PASSWORD RECOMMENDED–We highly recommend you
create a strong password of your own choosing (Using a minimum of
8 characters, including at least three of the following categories:
upper case letters, lower case letters, numbers, and special
characters.) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high
security system, resetting the password monthly or weekly can better
protect your product.
Optionally, check Security Question Configuration for
password resetting in the future.
Click OK to save the password and activate the device.
13
Advertisement
Table of Contents
