Hioki Memory HiCorder MR6000 Instruction Manual page 16

Setting Input Channels
Channel setting procedure
Analog channels (CH1 through CH32) setting procedure
Configuring input settings
Set the measurement mode.
Select an appropriate range for measurement.
Convert input values. (Scaling function)
Set the input coupling.
Set the low-pass filter (if noise is observed).
Configuring the display settings
Set the display color of waveforms.
Convert input values. (Scaling function)
Logic channels (Model 8973 Logic Unit) setting procedure
Configuring the display settings
Set the logic recording width.
Set the display positions of waveforms.
Set the display colors of waveforms.
12
(p. 13)
(p. 14)
(p. 16)
(p. 15)
(p. 15)
(p. 16)
(p. 16)
(p. 17)
(p. 17)
(p. 17)