Hioki Memory HiCorder MR6000 Instruction Manual page 14

Configuring Measurement Conditions
2
Set [Sampling].
The following are the sampling rates that can be selected when the envelope is used.
10 MS/s 5 MS/s,
 ,
5 kS/s, 2 kS/s, 1 kS/s,
30 S/min, 12 S/min,
3
Set [Shot].
Tap [Points] to set the number of measurement points.
2.5 k  , 5 k, 10 k, 20
500 M, 1 G
[Any]
Enabling and tapping
When the real-time save is set to [On],
Set [Recording time]
The maximum recording length that can be set varies depending on the number of channels to be measured.
10
2 MS/s, 1 MS/s, 500 kS/s,
500 S/s, 200 S/s, 100
6 S/min, 2 S/min, 1 S/min
k, 50 k, 100 k, 200 k, 500
[Points]
allows you to enter
[Shot] cannot be set in terms of [Points].
on the [Save] screen. (p. 73)
200 kS/s, 100 kS/s, 50 kS/s,
S/s, 50 S/s, 20 S/s, 10 S/s,
k, 1 M, 2 M, 5 M, 10 M, 20
[Points]
in increments of 100 points.
20 kS/s, 10 kS/s,
5 S/s, 2 S/s, 1 S/s,
M, 50 M, 100 M, 200 M,