Hioki Memory HiCorder MR6000 Instruction Manual page 130

Setting Numerical Calculation
Calculation type
Rise time Target channel
Fall time (Analog, real-time
waveform calculation)
Time
(5% → 95%
30% → 70%
or
95% → 5%
70% →
Stat.
X-Y area Target channel
Angle of XY waveform (X, Y)
(Analog, real-time
waveform calculation)
For
[Method].
method
approximation)
126
Setting
Allows you to specify channels
as calculation targets.
Allows you to specify which
(%)
part of the waveform between
to

the upper and lower limits is
used for calculating the rise
time (or fall time).
 to
The rise time (or fall time)
30%)
is calculated based on the
percentage, which is specified
here, of the range between the
upper and lower limit values.
Top  Detects the value obtained first
from the beginning within the
specified range.
Average Calculates the average,
maximum, or minimum value
Max
of each parameter within the
Min
specified range.
Allows you to assign channels
to the X- and Y-axis.
Calculates the X-Y area
[X-Y area], set
according to the calculation
(Coordinate
method.
Trapezoidal
 ,
Description Sample screen