Hioki Memory HiCorder MR6000 Instruction Manual page 121

3
Tap [Execute].
The search marks ( ) are put on the positions where the search condition is satisfied.
[Type] [Event
When is set to
When [Type] is set to [Search
The jump-position switching panel is displayed on the waveform screen.
4
Change [Search Pos.]
You can change the retrieved positions by tapping
mark], the display jumps to the position of a event mark
number], the display jumps to the position of a search mark
to check the jump result.
[<] or [>].
Allowing the Display to Jump to the Specified Position
( )
.
( )
.
117
6