Hioki Memory HiCorder MR6000 Instruction Manual page 158

Configuring the LAN Settings and Connecting to the Network
LAN setting procedure
Follow this procedure in accordance with the intended usage.
For details on each setting, refer to "Setting items" (p. 151).
For details on your network including the IP address, contact your network administrator.
Intended use
Settings to
connect the
instrument and
PC to the same
network
Settings to
connect the
instrument to
the different
network from
the computer
network (using
the gateway)
Connection
154
Connecting the instrument to the existing network
Connect the instrument
to the network using
the IP address obtained
automatically.
When you would like to name the
[Current PC
instrument, set
(Set automatically.)
Tap [OK].
Connect the straight-through cable.
Connect the instrument
to the network using the
specified IP address.
name].
[IP address]
Enter
of the instrument.
Enter [Subnet mask].
Enter [Default gateway].
Connecting the instrument
to the PC directly
[IP address]
Enter
of the instrument.
Enter [Subnet mask].
Tap [OK].
Connect the crossover
cable.