Vendor-Id; Device Type; Product Code; Revision - Datalogic DeviceNet AMT58 Series Instruction Manual

AMT58x-DN DeviceNET®

01-01-01 Vendor-ID

[UINT, ro]
Identification of each vendor by number.
Default = 0299h

01-01-02 Device type

[UINT, ro]
Default = 00h: general type.

01-01-03 Product code

[UINT, ro]
Identification of a particular product of an individual vendor.

01-01-04 Revision

[UINT, ro]
Hardware and software revisions, the Identity Object represents:
LSByte
major revision

01-01-05 Status

[WORD, ro]
This attribute represents the current status of the device. Its value
changes as the state of the device changes. Bit definitions are as
follows:
Bit(s)
0
1 Reserved
2 Configured
3 Reserved
36
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Called
Owned TRUE indicates the device (or an
object within the device) has an
owner.
paradigm the setting of this bit means
that
Connection Set has been allocated to
a Master. Outside the Master/Slave
paradigm the meaning of this bit is
TBD.
Reserved, shall be 0
TRUE indicates the application of the
device has been configured to do
something different than the "out–of–
box" default. This shall not include
configuration of the communications.
Reserved, shall be 0
MSByte
minor revision
Definition
Within the Master/Slave
the Predefined Master/Slave