Cip Objects - Anybus CompactCom 40 Network Manual

CIP Objects

12 CIP Objects
12.1 General Information
This chapter specifies the CIP-object implementation in the module. These objects can be
accessed from the network, but not directly by the host application.
Mandatory objects
• Identity Object (01h), p. 98
• Message Router (02h), p. 101
• Assembly Object (04h), p. 102
• Connection Manager (06h), p. 105
• QoS Object (48h), p. 113
• TCP/IP Interface Object (F5h), p. 122
• Ethernet Link Object (F6h), p. 125
CIP Energy Objects:
• Base Energy Object (4Eh), p. 114
• Power Management Object (53h), p. 116
Optional Objects:
• Port Object (F4h), p. 120
• Parameter Object (0Fh), p. 109
• DLR Object (47h), p. 112
Vendor Specific Objects:
• ADI Object (A2h), p. 118
It is possible to implement additional CIP-objects in the host application using the CIP forwarding
functionality, see
Object_Request.
Unconnected CIP routing is supported, which means that a message can be sent to a device
without first setting up a connection.
Anybus CompactCom 40 EtherNet/IP IIoT Network Guide
(Optional)
EtherNet/IP Host Object (F8h), p. 200 and commend details for Process_CIP_
SCM-1202–069 1.9 en-US
96 (244)