Anybus CompactCom 40 Network Manual page 66

JSON
ethconf.json
GET network/ethconf.json
Name
mac
comm1
comm2
The values of "comm1" and "comm2" are read from the Network Configuration object, instances
#7 and #8.
{
"mac":
"comm1":
"comm2":
}
The parameters "comm1" and "comm2" are configurable by adding them as arguments to the
GET request:
GET network/ethconf.json?comm1=0&comm2=4
The parameters "comm1" and "comm2" may hold an error object with Anybus error code if the
module fails processing the request:
{
"mac":
"comm1":
"comm2":
}
The Anybus CompactCom error codes are used. Please see the Anybus CompactCom 40 Software
Design Guide.
Anybus CompactCom 40 EtherNet/IP IIoT Network Guide
Data Type Note
-
String
-
Number
Number Only present if two Ethernet ports are activated in the module.
[00, 30, 11, FF, 02, 01],
0,
4
[00, 30, 11, FF, 02, 01],
0,
{ error: 14 },
64 (244)
SCM-1202–069 1.9 en-US