Argument Functions - Anybus CompactCom 40 Network Manual

Server Side Include (SSI)
8.4

Argument Functions

8.4.1 General Information
Argument functions are supplied as parameters to certain command functions.
General Syntax:
(Syntax depends on context)
Argument Functions:
Function
ABCCMessage()
8.4.2 ABCCMessage()
This function issues an object request towards an object in the module or in the host application.
Syntax
ABCCMessage(object, instance, command, ce0, ce1,
object
instance
command
ce0
ce1
msgdata
c_type:
r_type:
Numeric input can be supplied in the following formats:
Decimal (e.g. 50)
Octal (e.g. 043)
Hex (e.g. 0x1f)
Anybus CompactCom 40 EtherNet/IP IIoT Network Guide
msgdata, c_type, r_type)
Specifies the Destination Object
Specifies the Destination Instance
Specifies the Command Number
Specifies CmdExt[0] for the command message
Specifies CmdExt[1] for the command message
Specifies the actual contents of the MsgData[] subfield in the command
• Data can be supplied in direct form (format depends on c_type)
• The keyword "ARG" is used when data is supplied by the parent command (e.g. scanf()).
Specifies the data type in the command (msgdata), see below.
Specifies the data type in the response (msgdata), see below.
(no prefix)
Prefix 0 (zero)
Prefix 0x
Description
-
48 (244)
SCM-1202–069 1.9 en-US