Web Server
Name
Base topic
Quality of service
6.2.2
Ethernet Statistics Page
The Ethernet statistics web page contains the following information:
Ethernet Link
Port 1
Port 2
Ethernet/IP Statistics
Established Class1 Connections
Established Class3 Connections
Connection Open Requests
Connection Open Format Rejects
Connection Open Resource Rejects
Connection Open Other Rejects
Connection Close Requests
Connection Close Format Rejects
Connection Close Other Rejects
Connection Timeouts
MQTT State and Statistics
Broker address
Connection status
Unexpected disconnections
Connect errors
Successful publications
Publication errors too large
Publication errors other
Interface Counters
In Octets:
In Ucast Packets:
In NUcast packets:
In Discards:
In Errors:
In Unknown Protos:
Out Octets:
Anybus CompactCom 40 EtherNet/IP IIoT Network Guide
Description
0 - 128 characters
Integer within the range 0 - 2
Description
Speed:
The current link speed.
Duplex:
The current duplex configuration.
Speed:
The current link speed.
Duplex:
The current duplex configuration.
Description
Current number of established class1 connections
Current number of established class3 connections
Number of received connection open requests
Connection open requests rejected due to request format error
Connection open requests rejected due to lack of resources
Connection open requests rejected due to other reasons
Number of received connection open requests
Connection close requests rejected du to request format error
Connection close requests rejected due to other reasons
Number of connection timeouts
Description
Actual value of Network Configuration Object, Instance #50, Broker URL
State of the connection to the configured broker
Disconnected:
Connecting:
Connected:
Rejected - <return description>
Erroneous broker address
Failed
Number of unexpected disconnections of the broker connection
Number of failed connection attempts
Number of successful publications
Number of publications too large to be transmitted to the network
Number of publications that failed to be transmitted to the network
Description
Received bytes.
Received unicast packets.
Received non unicast packets (broadcast and multicast).
Received packets discarded due to no available memory buffers.
Received packets discarded due to reception error.
Received packets with unsupported protocol type.
Sent bytes.
MQTT not started
Connecting to the broker
Connected to the broker
Connection rejected by the broker,
description of the received return code
The broker address was not found on the
netowrk or of an invalid format
Connecting to the broker failed due to en
internal error or a network error
SCM-1202–069 1.9 en-US
27 (244)
Need help?
Do you have a question about the CompactCom 40 and is the answer not in the manual?
Questions and answers