Anybus CompactCom 40 Network Manual page 163

Anybus Module Objects
Socket Interface Error Codes (Object Specific)
The following object-specific error codes may be returned by the module when using the socket interface
object.
Error Code Name
1 ENOBUFS
2 ETIMEDOUT
3 EISCONN
4 EOPNOTSUPP
5 ECONNABORTED
6 EWOULDBLOCK
7 ECONNREFUSED
8 ECONNRESET
9 ENOTCONN
10 EALREADY
11 EINVAL
12 EMSGSIZE
13 EPIPE
14 EDESTADDRREQ
15 ESHUTDOWN
16
(reserved)
17 EHAVEOOB
18 ENOMEM
19 EADDRNOTAVAIL
20 EADDRINUSE
21 (reserved)
22 EINPROGRESS
28 ETOOMANYREFS
101
Command aborted
102 DNS name error
103 DNS timeout
104 DNS command failed
Anybus CompactCom 40 EtherNet/IP IIoT Network Guide
Meaning
No internal buffers available
A timeout event occurred
Socket already connected
Service not supported
Connection was aborted
Socket cannot block because unblocking socket type
Connection refused
Connection reset
Socket is not connected
Socket is already in requested mode
Invalid service data
Invalid message size
Error in pipe
Destination address required
Socket has already been shutdown
-
Out of band data available
No internal memory available
Address is not available
Address already in use
-
Service already in progress
Too many references
If a command is blocking on a socket, and that socket is closed using the Delete
command, this error code will be returned to the blocking command.
Failed to resolve the host name (name error response from DNS server.
Timeout when performing a DNS lookup.
Other DNS error.
161 (244)
SCM-1202–069 1.9 en-US