Report Statistics - Bosch Security Escort SE2000 Series Training Manual

174 en | Troubleshooting transponders, points, receivers, and alert units
Figure 7.35: Find Alarm Report Database Record
The system software can be configured to require that a report be completed prior to the end
of the shift in which the incident occurred. If the Require Alarm Report option is chosen in
the Edit Security Preferences dialog, the report can be filled out immediately after the alarm
is reset. However, if the report is not completed a reminder prompt appears on the screen
every 5 min. for 30 min. before the end of the shift. The time at which the prompt is to display
is also set in the Edit Security Preferences dialog.
All of the common database commands are available in the Reports Database, with the
following additional commands.
7.15.1

Report statistics

Clicking the [Statistics] button summarizes all the alarm reports that are captured in the
database. The alarm reports statistics window lists the number of alarms reports according to
their problem types.
2017.08 | V2.18.1.0 | DOC Training Manual
Security Escort
Robert Bosch (SEA) Pte Ltd