Bosch Security Escort SE2000 Series Training Manual page 212

212 en | System menus and dialogs
Figure 8.23: Receiver Test Dialog
Transponder
Transmitting Point
Total transmissions
Missed all receivers
Enable Rec
Point
Hits
Misses
Highest
2017.08 | V2.18.1.0 | DOC
Select the transponder for the transmitting point and each
receiving point. They can be on the same or different
transponders.
Select the point (receiver) on the selected transponder to
generate the transmissions.
The total number of times the designated receiver
transmitted the test message.
The total number of times where the test transmission was
not heard by any of the designated receivers.
This checkbox must be checked for this receiver to monitor
the test transmissions.
Select the point (receiver) on this transponder to monitor
the test transmissions.
The number of times this receiver successfully heard the test
transmission.
The number of times this receiver failed to hear the test
transmission.
The left box displays the highest receive level at which the
test transmission was heard. The right box displays the
greatest number of packets heard from a single test
transmission.
Training Manual
Security Escort
Robert Bosch (SEA) Pte Ltd