Bosch Security Escort SE2000 Series Training Manual page 115

Security Escort
No buddy check delay
No password to exit
No password on reentry
No password timeout
Bring to front on alarm
Bring to front on trouble
Control room output to
siren
Control room output to
strobe
Control room output to
spare
Not always top window
Excel test history files
Robert Bosch (SEA) Pte Ltd
Troubleshooting transponders, points, receivers, and alert units | en 115
If checked, the software does not impose the hour between
buddy checks from the same receiver. Normally, this checkbox is
not checked and should not be checked for live systems.
If checked, the software will exit without asking for a password.
Normally, this checkbox is not checked.
If checked, the software will not ask for a password when the
user switches to another program and then switches back to the
still running Security Escort. Normally, this checkbox is not
checked.
If checked, the software will not ask for a password after the
screen saver kicks in. Normally, this checkbox is not checked.
If checked, the software will jump to the front when a new alarm
occurs. Normally, this checkbox is checked.
If checked, the software will jump to the front when a trouble
dialog pops up. Normally, this checkbox is checked.
If checked, whenever there is an unacknowledged alarm, the
siren output on the control room output indicated below will
operate.
If checked, whenever there is an unacknowledged alarm, the
strobe output on the control room output indicated below will
operate.
If checked, whenever there is an unacknowledged alarm, the
spare output on the control room output indicated below will
operate.
If the Security Escort System is intended to be the only
application running on this computer, leave this checkbox
unchecked. This will prevent other applications from taking over
the screen. The Security Escort System will always be present. If
the Security Escort System is to be run on a computer with other
applications, check this checkbox and it will share the
computer's display like all other Windows applications. After
checking this checkbox, stop and restart the Security Escort
System for this feature to take effect. This checkbox is
unchecked by default.
Do not check this checkbox in a live Security Escort System. It
is for diagnostic Engineering testing only.
Training Manual 2017.08 | V2.18.1.0 | DOC