Ignore Holidays For This Schedule; Edit Schedule Times Dialog - Bosch Security Escort SE2000 Series Training Manual

140 en | Troubleshooting transponders, points, receivers, and alert units
7.11.1

Ignore Holidays for this schedule

Each schedule can use the holiday dates as exceptions. Schedules are activated (armed)
following the normal schedules if the holiday dates are configured to be ignored. Otherwise,
the schedules are activated the entire day for the holiday dates.
Figure 7.17: Holiday Selection in the Schedule Dialog
Ignore Holidays for this Schedule
Date [...]
[Remove >>]
[<< Add]
7.11.2

Edit Schedule Times dialog

This dialog allows the arming and disarming times to be programmed for each of the days of
the week. All times are expressed in 24-hour time (00:00 to 23:59). Each schedule has one
Arm Time and one Disarm Time for each of the 7 days of the week.
If both the Arm Time and Disarm Time are programmed to 00:00, the schedule will be active
(armed) for the entire day.
If the Arm Time is 00:00 and the Disarm Time is programmed, the schedule will be active
(armed) from midnight to the programmed Disarm Time. The schedule will be off (disarmed)
from the Disarm Time to the end of the day.
If the Disarm Time is 00:00 and the Arm Time is programmed, the schedule will be off
(disarmed) from midnight to the programmed Arm Time. The schedule will be active (armed)
from the Arm Time to the end of the day.
2017.08 | V2.18.1.0 | DOC
If the Ignore Holidays checkbox is checked for the
indicated holiday dates, the schedules are activated
(armed) that entire day. If the Ignore Holidays checkbox
is not checked, the normal action of the schedules takes
place on the holiday dates.
Clicking this button displays a calendar where you can
graphically select a date.
Clicking this button removes the selected date from the
Holiday dates list box.
Clicking this button adds the date shown to the Holiday
dates list box.
Training Manual
Security Escort
Robert Bosch (SEA) Pte Ltd