88
en | Central Console, computer setup and programming
[Cancel]
6.4.6
Alarm area setup
In the Transponder Database under the File menu, select the transponder where the alarm
area is to be programmed in. Click the [Edit Data] button, followed by Show areas radio
button and select the desired area.
Figure 6.13: Transponder Area Edit Dialog
2017.08 | V2.18.1.0 | DOC
Clicking this button closes the dialog. If changes were made, the dialog
below gives you another chance to save the changes by clicking the [Yes]
button.
Training Manual
Security Escort
Robert Bosch (SEA) Pte Ltd