Bosch Security Escort SE2000 Series Training Manual page 113

Security Escort
Figure 7.5: System Preferences Dialog
Force map background
erase
Run buddy check
Day month format
Supervise unauthorizedt
High speed buddy check
Robert Bosch (SEA) Pte Ltd
Troubleshooting transponders, points, receivers, and alert units | en 113
Use this checkbox to erase the map screen. It should only be
checked if there are problems with icons not being cleared
properly from the screen. Otherwise it will cause the screen to
flicker.
This checkbox enables and disables the buddy check feature of
the system. When checked, the Central Console periodically
issues a command (via the transponders) to each receiver, to
activate its on-board transmitter. The Central Console then
compares the signals received from neighboring receivers to the
results of earlier buddy checks, thus identifying receivers, which
appear to have changed sensitivity.
Checking this checkbox causes all dates to be presented in day
month year format rather than the month day year format used in
North America.
Supervise unauthorized transmitter.
Checking this checkbox allows the buddy check to run as fast as
it can. Normally, only one buddy check transmission is sent each
minute.
Training Manual 2017.08 | V2.18.1.0 | DOC