Bosch Security Escort SE2000 Series Training Manual page 217

Security Escort
Figure 8.26: Pager Setup Dialog
Automatically send
selected troubles
Phone number
Password
Pager ID
Character limit
Pages per call
Robert Bosch (SEA) Pte Ltd
If checked, send the troubles selected in the Popup trouble filter
dialog to the service pager.
Phone number to be dialed to access the paging service. This phone
number is usually different from the number you would manually dial
to send a page. The paging company assigns this value.
This is the password that must be sent to the paging service to send
the page. If not required, leave this field black. Usually a password is
not required. The paging company assigns this value.
This is the ID that identifies the specific pager that this message is to
be sent to. Many times, it is the last 7 digits of the phone number that
you would manually dial to access this pager. The paging company
assigns this value.
This is the maximum number of characters allowed per page.
Typically, this is set to 80 characters. The Security Escort System will
truncate the pager message at this number of characters. The paging
company assigns this value.
This is the maximum number of pager messages allowed per phone
call. Typically, this is set to 4 pages per call. When this number of
messages have been sent, and there are more messages to be
delivered; the Security Escort System will hang up and redial the
paging service to deliver the remaining messages. The paging
company assigns this value.
Training Manual
System menus and dialogs | en 217
2017.08 | V2.18.1.0 | DOC