Bosch Security Escort SE2000 Series Training Manual page 158

158 en | Troubleshooting transponders, points, receivers, and alert units
Data fields in required
order
Alert Unit 1
Alert Unit 1 Point
Alert Unit 2
Alert Unit 2 Point
Alert Unit 3
Alert Unit 3 Point
Alert Unit Test
Alert Unit Test Point
Point Location Text
Map X Position
Map Y Position
Sensitivity Adjust
Bitmap Number
2017.08 | V2.18.1.0 | DOC
Excel Column Restrictions
R This field contains the Transponder ID of the
alert unit. If this is not configured, this field is 0.
This field should contain only numeric ASCII
characters.
S This field contains the alert unit point number. If
this is not configured, this field is -1. This field
should contain only numeric ASCII characters.
T This field contains the Transponder ID of the
alert unit. If this is not configured, this field is 0.
This field should contain only numeric ASCII
characters.
U This field contains the alert unit point number. If
this is not configured, this field is -1. This field
should contain only numeric ASCII characters.
V This field contains the Transponder ID of the
alert unit. If this is not configured, this field is 0.
This field should contain only numeric ASCII
characters.
W This field contains the alert unit point number. If
this is not configured, this field is -1. This field
should contain only numeric ASCII characters.
X This field contains the Transponder ID of the
alert unit. If this is not configured, this field is 0.
This field should contain only numeric ASCII
characters.
Y This field contains the alert unit point number. If
this is not configured, this field is -1. This field
should contain only numeric ASCII characters.
Z This field may be up to 100 characters. This field
may contain any printable ASCII character
except the '?'.
AA X position of the point on the map. Default is 0.
This field should contain only numeric ASCII
characters.
AB Y position of the point on the map. Default is 0.
This field should contain only numeric ASCII
characters.
AC 0-99. This field should contain only numeric
ASCII characters.
AD 0-99. This field should contain only numeric
ASCII characters.
Training Manual
Security Escort
Robert Bosch (SEA) Pte Ltd