Bosch Security Escort SE2000 Series Training Manual page 184

184 en | System menus and dialogs
Notice!
If the Security Escort system is configured to share the database, you will need to exit the
Security Escort program on all slave and workstation computers. The master computer will
not be able to perform the backup properly as other computers are also using the files. The
master computer needs to have exclusive use of the database files.
Figure 8.8: Backup Dialog
When the Backup menu item is chosen, options are presented to save the databases to the
master or slave computer's hard drive. Verify that the backup destination is available before
clicking the [Backup] button. To abort the process, click the [Cancel] button in the dialog.
Only the databases with a checkmark will be backed up. Typically all databases should be
backed up at once. As insurance against database problems, multiple backups to different
disks should be made frequently. At least one backup copy should be stored in a different
location from this system (remember to keep this copy current).
Operators
Subscriber
Transponders
Reports
Master Database drive
Slave Database drive
Local Escort drive
2017.08 | V2.18.1.0 | DOC
This is the database of all of the individuals with passwords to
operate the system software and acknowledge alarms.
This database contains all of transmitters assigned in the system.
This database contains the configuration of the transponders,
receivers, virtual receivers and alert units.
This database contains all of the alarm reports and related alarm
map screens.
Store the backup files in the Security Escort Master Database path.
See the System Directories and Network Address dialog.
Store the backup files in the Security Escort Slave Database path.
See the System Directories and Network Address dialog.
Store the backup files in the save sub-directory as the Security
Escort System components are stored on this computer (typically
C:\ESCORT).
Training Manual
Security Escort
Robert Bosch (SEA) Pte Ltd