Bosch Security Escort SE2000 Series Training Manual page 119

Security Escort
Display unauthorized alarms This checkbox determines if "unauthorized" alarms are to be
Sound unauthorized alarms This checkbox determines if "unauthorized" alarms are to be
Filter virtual fence
No point text if area text
Output includes subscriber
ID
Output includes transmitter
ID
Limit alarms to 1
transponder
Limit alarms to one area
Man down Alarm On Auto
track
Robert Bosch (SEA) Pte Ltd
Troubleshooting transponders, points, receivers, and alert units | en 119
displayed on the Central Console. Unauthorized alarms are those
triggered by transmitters not currently registered in the
Subscriber Database. These could be transmitters that have
been removed from the database because they were lost or
stolen, they could be transmitters not yet issued, or they could
be transmitters issued to subscribers at another Security Escort
System. Typically this checkbox should not be checked.
sounded on the horns of the receivers and the sirens of the alert
units and transponders. The option is not available unless the
Display unauthorized alarms option is selected. Typically this
checkbox should not be checked.
If the virtual fence option is be used, this box may be checked if
some false alarms are generated to reduce the number of the
false alarms. If it is checked then the actual alarms will be
delayed by the supervision period of the transmitter.
This checkbox affects the location text shown on the alarm
screen. If this checkbox is checked and the alarm is determined
to be within a predefined area then only the area text will be
displayed (any receiver location text will be suppressed).
Typically this checkbox should be checked.
If this checkbox is checked, then any time the system prints or
displays text for an alarm or test the subscriber's ID number will
also be displayed. Otherwise the subscriber's ID will not be
shown.
If this checkbox is checked, then any time the system prints or
displays text for an alarm or test the transmitter ID number will
also be displayed. Otherwise the transmitter ID will not be
shown. Typically this checkbox would not be checked.
This checkbox should not be checked. It was used only in a
system where all transponders operate on areas that are
separate from each other. It would prevent all interactions
between receivers on different transponders. Typically this
would be very undesirable and there is now a selection on an
individual transponder basis to accomplish this feature.
This checkbox should not be checked. It is used only in a system
where all transponders operate on areas that are separate from
each other.
If this checkbox is checked, then any time there is a man down
alarm, the auto track functionality will be activated. Otherwise
there is no auto track functionality for the alarm.
Training Manual 2017.08 | V2.18.1.0 | DOC