Restore - Bosch Security Escort SE2000 Series Training Manual

Security Escort
Other Backup drive
[Backup]
8.2.2

Restore

Should one or more database files become corrupted or erased due to a hard drive failure,
power surges or other unpredictable events, it is necessary to restore the databases from
backup files. The Restore function allows loading of selected databases from backup files. It is
not necessary to perform the Restore function on all databases in order to restore any one. All
changes that occurred since the last backup are lost when a database is restored. Therefore,
restore only those databases with a problem. Backups should be made whenever significant
changes are made to any database.
Notice!
If the Security Escort system is configured to share the database, you will need to exit the
Security Escort program on all slave and workstation computers. The master computer will
not be able to perform the restore properly as other computers are also using the files. The
master computer needs to have exclusive use of the database files.
Figure 8.9: Restore Dialog
Select the database to be restored on the left. On the right, this is where the database backup
is currently located. Click the [Restore] button to replace the existing database file with the
backup. This process also rebuilds the database and its index tables to correct most database
structure problems. To abort the restore process, click the [Cancel] button.
Operators
Robert Bosch (SEA) Pte Ltd
Store the backup files in the Other Backup/Restore path assigned
in the System Directories and Network Address dialog. This path
may be a local path, external drive or a network disk drive.
When the [Backup] button is clicked, all databases selected with a
checkmark will be saved to the destination selected on the right.
This is the database of all of the individuals with passwords to
operate the system software and acknowledge alarms.
Training Manual
System menus and dialogs | en 185
2017.08 | V2.18.1.0 | DOC