Current Check-In Status Dialog - Bosch Security Escort SE2000 Series Training Manual

144 en | Troubleshooting transponders, points, receivers, and alert units
Figure 7.21: Alarm Group State Dialog
[Print Report]
[Acknowledge]
7.11.6

Current Check-in Status dialog

This dialog displays a list of subscribers that are required to check-in and failed to do so
during the last check-in period. Also shown are their addresses, phone numbers, and the last
time they checked-in.
2017.08 | V2.18.1.0 | DOC
Clicking this button prints the displayed data to the report printer.
Clicking this button closes the dialog if it was selected from the menu.
However, if the dialog was presented automatically at the arm time of an
alarm group's automatic schedule because they were not restored, or there
was an alarm while the alarm group was on, then you are required to enter
your password to acknowledge the dialog, and remove it from this
computer's (and all other computer workstations) screens.
Training Manual
Security Escort
Robert Bosch (SEA) Pte Ltd