Bosch Security Escort SE2000 Series Training Manual page 83

Security Escort
1.
2.
3.
Figure 6.7: Select Point Dialog with "Receivers Only" Selected
Alternatively, the [+], [-], [Bus +] and [Bus –] buttons, just below the Point Number and Point
Type, allow the user to quickly advance the device selection by one location, either one Point
location ([+] or [-]) or one Bus number ([Bus +] or [Bus -]). This is useful when a task requires
proceeding from device to device, as during system setup or check out. The [?] button is used
to display all devices to facilitate quick selection of a particular device. It is most useful when
diagnosing a problem with a particular device.
Selecting the Point Type
The Point Type drop-down list indicates the type of device at the location currently selected in
the Point Number field. Once the Point Number text box contains the proper value, the
device type can be selected from the Point Type drop-down list.
Figure 6.8: Drop-Down List for Selection of Point Type
Robert Bosch (SEA) Pte Ltd
all possible device numbers ([All Points] button) regardless that the particular
transponder has a device assigned to the number,
only locations populated by receivers ([Receivers Only] button), or
only locations populated by alert units ([Alerts Only] button).
Central Console, computer setup and programming | en
Training Manual
83
2017.08 | V2.18.1.0 | DOC