Bosch Security Escort SE2000 Series Training Manual page 114

114 en | Troubleshooting transponders, points, receivers, and alert units
Show maintenance levels
Show test levels
Enable algorithm tweaks
Pager communications
Monitor communications
Monitor supervisions
Display maintenance alarm Normally, when a maintenance alarm is received from a
Sound maintenance alarm
Disable idle processing
2017.08 | V2.18.1.0 | DOC
Checking this checkbox causes the Central Console to display
the signal strength measured by each receiver as a number (from
1 to 15) inside the receiver icon when maintenance alarms are
displayed. Otherwise, the floor number is displayed.
Checking this checkbox causes signal strength levels to appear
on the receiver icons when displaying tests on the main map
screen. Otherwise the green test" icons are displayed.
Checking this checkbox causes the Map Scale, Alarm Spot Size,
and depth settings to be displayed in this dialog. It also controls
the display of the SA% and Algorithm settings in the Edit
Transponder's Database Record dialog
Normally, this checkbox is not checked. If checked, the
communications to the dial-up wide area paging system through
the modem will be displayed on the history screen. This function
is only used to diagnose communications problems to the paging
system.
Normally, this checkbox is not checked. If checked, the
communications to the modem will be displayed on the history
screen. This function is only used to diagnose communications
problems with the modem.
Monitor supervision alarms.
maintenance transmitter, the red LED on all receivers hearing the
transmission will flash for 5 seconds. If this checkbox is checked,
the receiver with the loudest reception level will turn on both the
red and green LED for 5 seconds.
If this checkbox is checked, the receiver with the loudest
reception level on a maintenance alarm will turn on its sounder
for 5 seconds. Normally this checkbox is not checked.
Normally this software registers with Windows to return to the
Security Escort System if there is any idle time. The Security
Escort System can use it to speed up its response to serial
communications and other background tasks. If checked, the
software will not register for the idle time. Normally, this
checkbox is not checked. Windows can show the amount of time
each application (task) is taking. When this checkbox is not
checked, it may appear that Security Escort System is "hogging"
the processor resources. This is not true, because the Security
Escort System is only taking the time that Windows gives it
through the idle process. To prove this, check this checkbox. The
amount of time that the Security Escort System needs will drop
dramatically, and it will continue to operate normally (same
communications responses will be slowed by several hundred
milliseconds).
Training Manual
Security Escort
Robert Bosch (SEA) Pte Ltd