Alarm Group State Dialog - Bosch Security Escort SE2000 Series Training Manual

Security Escort
Alarm group #
Arming state of this alarm
group
Off (disarmed)
On (armed)
Automatic by schedule
[First]
[Previous]
[Next]
[Last]
7.11.5

Alarm Group State dialog

This dialog will display a list of the alarm groups that are currently armed, and have one or
more transmitters (points) faulted. The points are presented because they were not restored
when their automatic schedule armed, or there was an alarm while the alarm group was on.
Robert Bosch (SEA) Pte Ltd
Troubleshooting transponders, points, receivers, and alert units | en 143
This is the number of the alarm group (1-99).
The Off (disarmed), On (armed) and Automatic by Schedule
selection control the arming state of this alarm group.
Selecting this option disarms the alarm group. The alarm group
will remain off (disarmed) until manually changed in this dialog
to On (armed) or Automatic by Schedule.
Selecting this option arms the alarm group. The alarm group will
remain on (armed) until manually changed in this dialog to Off
(disarmed) or Automatic by Schedule.
Selecting this option assigns the alarm group's arming state to
be controlled by the indicated schedule. When the schedule is
active (on or armed) the alarm group will be armed. When the
schedule is off (disarmed) the alarm group will be disarmed. Any
number of alarm groups may be assigned to the same schedule.
Clicking this button takes you to alarm group 1.
Clicking this button takes you to the next lower alarm group from
the one currently displayed. It will not wrap around. Therefore, it
will be disabled at alarm group 1.
Clicking this button takes you to the next higher alarm group
from the one currently displayed. It will not wrap around.
Therefore, it will be disabled at alarm group 99.
Clicking this button takes you to alarm group 99.
Training Manual 2017.08 | V2.18.1.0 | DOC