About Menu - Bosch Security Escort SE2000 Series Training Manual

228 en | System menus and dialogs
[Reset Status]
[Refresh Data]
8.6

About menu

Figure 8.34: About Menu
Demo manual alarm, subscriber 1For demonstration only, and can't be used in a live system.
Demo lanyard alarm, subscriber
2
Demo man down alarm,
subscriber 3
Demo man down restoral,
subscriber 3
2017.08 | V2.18.1.0 | DOC
Clicking this button resets all values shown in this dialog.
Clicking this button refreshes all values shown in this dialog. The
values are not automatically updated when the dialog is left open.
It causes system to display an alarm from the subscriber
with transmitter ID number 1. In the System Preferences
dialog, select Enable Demo Selections checkbox to enable
these demo alarm and trouble selections. The transponder
communication ports and network communication ports
must also be disabled, and the operator of the system must
login at "Installer" or "Installer Master" authority level.
For demonstration only, and can't be used in a live system.
It causes system to display a lanyard alarm from the
subscriber with transmitter ID number 2.
For demonstration only, and can't be used in a live system.
It causes system to display a man down alarm from the
subscriber with transmitter ID number 3. The man down
alarm is delayed by the programmed man down delay
(usually 10 seconds).
For demonstration only, and can't be used in a live system.
It will restore a previous man down alarm from the
subscriber with transmitter ID number 2, if it has not timed
out and is not being displayed.
Training Manual
Security Escort
Robert Bosch (SEA) Pte Ltd