Bosch Security Escort SE2000 Series Training Manual page 139

Security Escort
Figure 7.16: Schedule Screen
For each day-of-the-week, the arm time (time the schedule becomes active) and disarm time
(time the schedule becomes inactive) are displayed. To edit the arm and disarm times, click
the [Edit Schedule Times] button. Double clicking the number of the schedule allows you to
name the schedules.
This schedule defines the check-
in times
[Edit Schedule Times]
[View Alarm Groups]
Ignore Holidays for this
Schedule
Robert Bosch (SEA) Pte Ltd
Troubleshooting transponders, points, receivers, and alert units | en 139
One of the ten schedules can be used to define the check-in
times for those subscribers that must check-in. Click on the
schedule for the check-in schedule, highlighting it. Then
check this checkbox, to set the selected schedule as the
check-in schedule. Both the arm time and disarm time must
be programmed for every day the check-ins must take place.
The arm time is the start of the check-in schedule and it
must occur before the disarm time that marks the end of the
check-in schedule for that day.
Clicking this button displays the Edit Schedule Times dialog
so the day of week arm and disarm schedule times can be
edited.
Clicking this button displays the View Alarm Groups dialog.
This screen shows the alarm groups assigned to the selected
schedule and their current arming state.
Each schedule can use the holiday dates as exceptions.
Training Manual 2017.08 | V2.18.1.0 | DOC