Exporting The Subscriber Database - Bosch Security Escort SE2000 Series Training Manual

Security Escort
Data fields in required
order
Low Battery
Prev Checkin Time Diff
Option Flag
Alarm Back Color
Transponder Parameters
Number Of Tests
Is ATTransmitter
IsMandown Enabled
IsLanyard Enabled
IsSupervision Enabled
AutoTrack Duration
MandownBuzzer Duration
Type
7.12.2

Exporting the Subscriber Database

This section describes the information required to export data from the Subscriber Database.
Only users or operators who are assigned the minimum security level of "View Subscribers"
are able to view the Subscriber Database. Go to menu File > Subscriber Database dialog, and
click the [Export] button.
Notice!
Important! The export operation does not change the existing records in Subscriber
Database. However, be mindful that every time you perform the export function (clicking the
[Export] button), the operation will overwrite the default export file.
A popup dialog appears. You can choose the folder where you wish to save the file in, or
provide a different file name other than default name.
Robert Bosch (SEA) Pte Ltd
Troubleshooting transponders, points, receivers, and alert units | en 151
Excel Column Restrictions
BE Encoded 32-bit time value. Do not change.
BF Time difference between the previous check-in
time and current time.
BG "0 Not selected", "1 Requires Check-in", "2
Requires Restore", "3 Requires Check-in and
Restore". This field may contain only numeric
ASCII characters.
BH Long value of the alarm background color. The
formula to generate the long value is:
(65536*Blue) + (256*Green) + (Red). This field
may contain only numeric ASCII characters.
BI ID of the transponder that defines the virtual
alarm setup. 0-255. This field may contain only
numeric ASCII characters.
BJ Number of tests performed for the subscriber.
This field may contain only numeric ASCII
characters.
BK 0. For future use only.
BL 0. For future use only.
BM 0. For future use only.
BN This field may contain only numeric ASCII
characters. If Supervision Duration is "None",
value is 0. If Supervision Duration is set, value is
1. Also see Supervision Interval (column AM).
BO 5. For future use only.
BP 0. For future use only.
BQ 0. For future use only.
Training Manual 2017.08 | V2.18.1.0 | DOC