Edit Subscriber Database Record - Bosch Security Escort SE2000 Series Training Manual

126 en | Troubleshooting transponders, points, receivers, and alert units
Figure 7.10: Subscriber Print Dialog
[Write EXCEL import file]
[Print]
[Cancel]
7.10.2

Edit Subscriber Database record

When editing a subscriber's file or creating a new file, the following information must be
entered to complete the file: subscriber name, subscriber identification number, and
transmitter identification code. The computer does not allow the edit screen to be closed until
all of the mandatory fields are completed. The accuracy of information in the Subscriber
Database is very important: in the event that a subscriber transmits an alarm, the information
displayed in the alarm screen is taken from this database. A faulty address could hinder
security's response to an alarm.
2017.08 | V2.18.1.0 | DOC
Clicking the [Write EXCEL import file] button causes all the
fields of all the records to be sent to the "subscrib.txt" file in the
folder in which Security Escort was installed. This file may be
directly imported into Microsoft Excel or any other application
that accepts tab delimited text..
Clicking the [Print] button causes the selected data fields to
print on the report printer in the indicated sort order.
Clicking the [Cancel] button aborts the print dialog and returns
to the previous screen.
Training Manual
Security Escort
Robert Bosch (SEA) Pte Ltd