Subscriber (Individual) Pager Setup - Bosch Security Escort SE2000 Series Training Manual

Hide thumbs Also See for Security Escort SE2000 Series:
Table of Contents

Advertisement

136 en | Troubleshooting transponders, points, receivers, and alert units
Requires Check-in
Done
7.10.6

Subscriber (individual) Pager Setup

In the Subscriber Database select the record for the desired individual. Click the [Edit Data]
button, followed by the [Advanced] button. The dialog below will be displayed.
2017.08 | V2.18.1.0 | DOC
When this checkbox is checked, this transmitter will have to be
activated once each day during the Check-in Schedule time. At the
end of the check-in period, if the subscriber fails to check-in, a Failed
to Check-in Report will be generated and presented to the operator
of the software. This report contains all of the people who failed to
check-in with their first address line and phone number. All
subscribers in the report must be checked on to make sure they are
not in need of assistance, as this may be a life-treating situation. A
printed report may also be generated.
If the transmitter is not a point type, then the transmitter can
generate alarms and therefore a test transmission will be used for
the check-in.
If the transmitter is a point type, then any non-trouble transmission
will serve as a check-in.
One of the 10 schedules must be selected as the check-in schedule
to define the check-in period.
Click this button when all changes to this dialog are completed and
return the main Subscriber Database edit dialog.
Training Manual
Security Escort
Robert Bosch (SEA) Pte Ltd

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents