Bosch Security Escort SE2000 Series Training Manual page 137

Security Escort
Figure 7.14: Subscriber Database Advanced Dialog
The pager ID is required for all individual pagers dial-up and local. If the phone number and
password are assigned, the page will be sent over the modem connection. If the phone
number and password fields are blank, the page will be routed to the local paging system. If
you do not desire this individual to have pager support leave the phone number, password and
pager ID fields all blank.
If the pager information is entered above, this individual may be assigned to 2 paging groups.
Each group will accept 8 members maximum. Remember it takes time to communicate with a
paging service, therefore only add members to a group if they need to be there, otherwise you
may slow the paging report to people that must respond.
A pager group may contain members accessed by the local paging system and members
that require dial-up access. Dial-up access typically takes much longer and it may slow
pages to the local paging system.
Robert Bosch (SEA) Pte Ltd
Troubleshooting transponders, points, receivers, and alert units | en 137
Training Manual 2017.08 | V2.18.1.0 | DOC