Table of Contents
Advertisement
Security Escort
Figure 9.31: Find Alarm Report Database Record dialog window
The system software can be configured to require that a report be completed prior to the end
of the shift in which the incident occurred. If the Require Alarm Report option is chosen in
the Security Preferences dialog, the report can be filled out immediately after the alarm is
reset. However, if the report is not completed a reminder prompt appears on the screen every
5 min. for 30 min. before the end of the shift. The time at which the prompt is to display is
also set in the Security Preferences dialog.
All of the common database commands are available in the Reports database, with the
following additional commands.
9.11.1
Statistics
Click the [Statistics] button to summarize all the alarm reports that are captured in the
database. The alarm reports statistics window lists the number of alarms reports according to
their problem types.
Robert Bosch (SEA) Pte Ltd
Troubleshooting coordinators, points and receivers | en 157
Technical Reference Manual
2018.03 | SE3v1.0 | DOC
Advertisement
Table of Contents
