WEG CFW-11 Programming Manual page 94

Scalar Control (V/f)
b) Prepare the inverter and apply power: according to the section 5.1 of the CFW-11 User Manual.
c) Adjust the password P0000=5: according to the section 5.3 of this manual.
d) Adjust the inverter to operate with the application line and motor: execute the Oriented Start-up
routine according to the section 5.2.2 of the CFW-11 User Manual. Refer to the section 11.7 (Motor Data)
of this manual.
e) Setting of specific parameters and functions for the application: program the digital and analog
inputs and outputs, HMI keys, etc., according to the application needs.
For applications:
- That are simple, which can use the factory settings programming for the digital and analog inputs and
outputs, use the Menu "Basic Application". Refer to the section 5.2.3 of the CFW-11 User Manual.
- That require only the digital and analog inputs and outputs with programming different from the factory
settings, use the Menu "I/O Configuration".
- That need functions as Flying Start, Ride-Through, DC Braking, Dynamic Braking, etc., access and modify
those functions parameters by means of the Menu "Parameter Groups".
9
9-14