WEG CFW-11 Programming Manual page 239

Proprieties:
Access groups 01 PARAMETER GROUPS
via HMI:
Description:
They select the signals that will be recorded at the channels 1 to 4 of the Trace Function.
The options are the same that are available at P0550. By selecting the "Not Selected" option, the total memory
available for the Trace function is distributed between the active channels.
P0571 – Start trace function
Adjustable 0 = Off
Range: 1 = On
Proprieties:
Access groups 01 PARAMETER GROUPS
via HMI:
Description:
It initiates the waiting for the Trace Function trigger.
Since it is a parameter that can be changed with the motor running, it is not necessary to press "Save" on the keypad
(HMI) for the "trigger" waiting to initiate.
This parameter does not have effect if there is no active channel or if there is no memory available for the Trace
Function (P0560 = 0).
P0571 returns automatically to 0, for safety reasons, if any of the parameters between P0550 and P0564 is
changed.
P0572 – Day/Month trace triggered
Adjustable 00/00 to 31/12
Range:
P0573 – year trace triggered
Adjustable 00 to 99
Range:
P0574 – Hour trace triggered
Adjustable 00:00 to 23:59
Range:
P0575 – Second trace triggered
Adjustable 00 to 59
Range:
52 Trace Function
52 Trace Function
Trace Function [52]
Factory 0
Setting:
Factory
Setting:
Factory
Setting:
Factory
Setting:
Factory
Setting:
19-5
19