WEG CFW-11 Programming Manual page 57

9 = Process Variable #
10 = Setpoint PID #
11 = Speed Reference -
12 = Motor Speed -
13 = Motor Current -
14 = DC Link Voltage -
15 = Motor Frequency -
16 = Motor Voltage -
17 = Motor Torque -
18 = Output Power -
19 = Process Variable -
20 = Setpoint PID -
Proprieties:
Access groups 01 PARAMETER GROUPS
via HMI:
Description:
Those parameters define which variables, and in what manner they will be shown on the keypad (HMI) display in
the monitoring mode.
The options that present the symbol "#" at the end indicate that the variable will be displayed in absolute numerical
values. The options ended with the symbol "–", configure the variable to be displayed as a bar graph, in percentage
values. More details on this programming can be seen in the section 5.6 next.
P0208 – Reference Scale factor
Adjustable 0 to 18000
Range:
P0212 – Reference Decimal Point
Adjustable 0 = wxyz
Range: 1 = wxy.z
2 = wx.yz
3 = w.xyz
Proprieties:
Access groups 01 PARAMETER GROUPS
via HMI:
Description:
They define how the Speed Reference (P0001) and the Motor Speed (P0002) will be presented when the motor runs
at the synchronous speed.
In order to indicate the value in rpm, P0208 must be adjusted at the motor synchronous speed according to the
next table:
Frequency
50Hz
60Hz
30 HMI
30 HMI
Table 5.4 - Synchronous speed reference in rpm
Number of Motor Poles
2
4
6
8
2
4
6
8
Programming Basic Instructions
Factory
Setting:
Factory
Setting:
Synchronous Speed in rpm
3000
1500
1000
750
3600
1800
1200
900
1800
(1500)
5
0
5-5