WEG CFW-11 Programming Manual page 214

Faults and Alarms
P0834 - DiM1 and DiM2 Status
Adjustable
Range:
Proprieties:
Access groups
via HMI:
Description:
Through this parameter it is possible to visualize the status of the 2 digital inputs of the Modular Drive interface
board.
The indication is done by means of the numbers 1 and 0, representing respectively the states No Fault/Alarm or
With Fault/Alarm at the inputs.
The state of each input is considered as one digit in the sequence where DIM1 represents the least significant
digit.
Refer to the CFW-11M User Manual to obtain more information.
15
15-16
Bit 0 = DIM1
Bit 1 = DIM2
RO
01 PARAMETER GROUPS
40 Digital Inputs
Factory
Setting:
or 09 READ ONLY PARAMETERS