WEG CFW-11 Programming Manual page 59

Examples:
A, B, ..., Y, Z,
- To indicate "L/s":
P0209="L" (76)
P0210="/" (47)
P0211="s" (115)
P0213 – full Scale Reading Parameter 1
P0214 – full Scale Reading Parameter 2
P0215 – full Scale Reading Parameter 3
Adjustable 0.0 to 200.0 %
Range:
Proprieties: CFG
Access groups 01 PARAMETER GROUPS
via HMI:
Description:
Those parameters configure the full scale of the reading variables 1, 2 and 3 (selected through P0205, P0206 and
P0207), when they were programmed to be presented as bar graphs.
P0216 – HMi Display contrast
Adjustable 0 to 37
Range:
Proprieties:
Access groups 01 PARAMETER GROUPS
via HMI:
Description:
It allows setting the keypad (HMI) display contrast level. Higher values configure a higher contrast level.
a, b, ..., y, z, 0,
- To indicate "CFM":
P0209="C" (67)
P0210="F" (70)
P0211="M" (77)
30 HMI
30 HMI
Programming Basic Instructions
1, ..., 9, #, $, %, (, ), *, +, ...
Factory 100.0 %
Setting:
Factory 27
Setting:
5-7
5