WEG CFW-11 Programming Manual page 221

P0043 – time enabled
Adjustable 0.0 to 6553.5 h
Range:
Proprieties: RO
Access groups 09 READ ONLY PARAMETERS
via HMI:
Description:
It indicates the total number of hours that the inverter remained enabled.
It indicates up to 6553.5 hours, and then it gets back to zero.
By setting P0204=3, the value of the parameter P0043 is reset to zero.
This value is kept even when power is removed from the inverter.
P0044 – kWh counter
Adjustable 0 to 65535 kWh
Range:
Proprieties: RO
Access groups 09 READ ONLY PARAMETERS
via HMI:
Description:
It indicates the energy consumed by the motor.
It indicates up to 65535 kWh, and then it gets back to zero.
By setting P0204=4, the value of the parameter P0044 is reset to zero.
This value is kept even when power is removed from the inverter.
Note!
The value indicated in this parameter is calculated indirectly, and must not be used to measure the
energy consumption.
P0045 – fan enabled time
Adjustable 0 to 65535 h
Range:
Proprieties: RO
Access groups 09 READ ONLY PARAMETERS
via HMI:
Read Only Parameters [09]
Factory
Setting:
Factory
Setting:
Factory
Setting:
16
16-7