WEG CFW-11 Programming Manual page 56

Programming Basic Instructions
P0200 – Password
Adjustable
Range:
Proprieties:
Access groups
via HMI:
Description:
It allows changing the password and/or setting its status, configuring it as active or inactive. For more details on
each option, refer to the table 5.3 described next.
2 (Changed Password)
When the option 2 is selected (Change password), the inverter opens a window for changing the password, allowing
the selection of a new value for it.
P0201 – Language
Adjustable
Range:
5
Proprieties:
Access groups
via HMI:
Description:
It determines the language in which information will be presented on the keypad (HMI).
P0205 – Reading Parameter Selection 1
P0206 – Reading Parameter Selection 2
P0207 – Reading Parameter Selection 3
Adjustable
Range:
5-4
0 = Off
1 = On
2 = Change Password
01 PARAMETER GROUPS
30 HMI
Table 5.3 - Options for the parameter P0000
P0200
0 (Inactive) It allows parameter changes regardless of P0000
It does only allow parameter changes when the content of P0000 is equal
1 (Active)
to the password
It opens a window for changing the password
0 = Português
1 = English
2 = Español
3 = Deutsch
01 PARAMETER GROUPS
30 HMI
0 = Not selected
1 = Speed Reference #
2 = Motor Speed #
3 = Motor Current #
4 = DC Link Voltage #
5 = Motor Frequency #
6 = Motor Voltage #
7 = Motor Torque #
8 = Output Power #
Factory
Setting:
Kind of Action
Factory
Setting:
1
0
Factory P0205=2
Setting: P0206=3
P0207=5