WEG CFW-11 Programming Manual page 170

Digital and Analog Inputs and Outputs
P0253 – ao1 Signal type
P0256 – ao2 Signal type
Adjustable
Range:
P0259 – ao3 Signal type
P0262 – ao4 Signal type
Adjustable
Range:
Proprieties:
Access groups
via HMI:
Description:
13
These parameters configure if the analog output signal will be in current or voltage, with direct or inverse reference.
In order to adjust these parameters, it is also necessary to set the "DIP switches" of the control board or of the IOA
Accessory Board, according to the tables 13.5, 13.6 and 13.7.
13-10
Table 13.4 - Full scale
SCALE OF THE ANALOG OUTPUT INDICATIONS
Variable
Speed Reference
Total Reference
Real Speed
Encoder Speed
Torque Current Reference
Torque Current
Torque Current > 0
Motor Torque
Output Current
Active Current
PID Process Variable
PID Setpoint
Output Power
Motor Ixt
SoftPLC
P0696 Value
P0697 Value
P0698 Value
P0699 Value
(*) When the signal is inverse (10 to 0 V, 20 to 0 mA or 20 to 4 mA) the values
in the table become the beginning of the scale.
0 = 0 to 10 V/20 mA
1 = 4 to 20 mA
2 = 10 V/20 mA to 0
3 = 20 to 4 mA
0 = 0 to 20 mA
1 = 4 to 20 mA
2 = 20 mA to 0
3 = 20 to 4 mA
4 = 0 to 10 V
5 = 10 to 0 V
6 = -10 to +10 V
CFG
07 I/O CONFIGURATION
39 Analog Outputs
Full Scale (*)
P0134
2.0 x I
nomHD
2.0 x I
nom
1.5 x I
nomHD
P0528
1.5 x √3 x P0295 x P0296
100 %
32767
or 01 PARAMETER GROUPS
39 Analog Outputs
Factory 0
Setting:
Factory 4
Setting: