WEG CFW-11 Programming Manual page 77

8. In order to copy the contents of the Inverter A parameters to other inverters, repeat the same procedures 5
to 7 described previously.
Figure 7.2 - Parameter copy from "Inverter A" to the "Inverter B"
Note!
As long as the keypad (HMI) is performing the reading or the writing procedure, it will not be possible
to operate it.
INVERTER
INVERTER
A
B
Parameters
Parameters
INV → HMI HMI → INV
EEPROM EEPROM
HMI HMI
Starting-up and Settings
7
7-5