WEG CFW-11 Programming Manual page 240

Trace Function [52]
Proprieties:
Access groups
via HMI:
Description:
P0572 to P0575 record the date and hour of the trigger occurrence. These parameters and the points acquired by
the Trace Function are not saved when the inverter is powered off.
There are two possibilities for P0572 to P0575 being null:
- No acquisition was performed after the inverter power on, or
- Trace happened without keypad (HMI) connected to the inverter (no RTC).
P0576 – trace function Status
Adjustable
Range:
Proprieties:
Access groups
via HMI:
Description:
It indicates if the Trace function has been initiated, if there has been already a trigger and if the signals have already
been completely acquired.
19
19-6
RO
01 PARAMETER GROUPS
52 Trace Function
0 = Off
1 = Waiting
2 = Triggered
3 = Concluded
RO
01 PARAMETER GROUPS
52 Trace Function
Factory
Setting: