WEG CFW-11 Programming Manual page 71

P0296 – Line Rated Voltage
Adjustable 0 = 200 ... 240 V
Range: 1 = 380 V
2 = 400 / 415 V
3 = 440 / 460 V
4 = 480 V
5 = 500 / 525 V
6 = 550 / 575 V
7 = 600 V
8 = 660 / 690 V
Proprieties: CFG
Access groups 01 PARAMETER GROUPS
via HMI:
Description:
Setting according to the inverter power supply voltage.
The adjustable range depends on the inverter model, according to the table 6.8, which also presents the factory
default value.
Note!
When adjusted via the keypad (HMI), this parameter may change automatically the following
parameters: P0151, P0153, P0185, P0321, P0322 and P0323.
Table 6.8 - P0296 setting according to the CFW-11 inverter model
Inverter Model
200-240 V
380-480 V
500-600 V
660-690 V
P0297 – Switching frequency
Adjustable 0 = 1.25 kHz
Range: 1 = 2.5 kHz
2 = 5.0 kHz
3 = 10.0 kHz
Proprieties: CFG
Access groups 01 PARAMETER GROUPS
via HMI:
42 Inverter Data
Adjustable Range
0 = 200...240 V
1 = 380 V
2 = 400 / 415 V
3 = 440 / 460 V
4 = 480 V
5 = 500 / 525 V
6 = 550 / 575 V
7 = 600 V
8 = 660 / 690 V
42 Inverter Data
Inverter Model and Accessories Identification
Factory Setting
Factory According to
Setting: the inverter
model
0
3
6
8
Factory 2
Setting:
6-7
6