Take-Up Unit; Power Supply Switch - MIMAKI UJV100-160 Operation Manual

Chapter 1 Before Using This Product

Take-up Unit

Use the switch on the take-up unit to change the media take-up direction.
Name
Direction selector Up
switch
Down
ON/OFF button Press the button to start/stop the take-up unit. The setting can be altered so that the
take-up unit operates only while the button is depressed.
"Machine Setup Menu List"(P. 79)

Power Supply Switch

This product has two power supply switches.
l Main power supply switch
This is located on the right-hand side of the product. Normally, it should be left on at all times.
ON/OFF button
Direction selector switch
To take up media with printed surface on the inside
To take up media with printed surface on the outside
Main power supply switch
24
Summary