ABB ACS880 Firmware Manual page 74

74 Parameters
No. Name/Value
114.16 DIO2 output source
114.17 DI2 ON delay
0.00 ... 3000.00 s
114.17 DIO2 ON delay
*DIO status
**Delayed DIO status
tOn = 114.17 DIO2 ON delay
tOff = 114.18 DIO2 OFF delay
*Electrical status of DIO (in input mode) or status of selected source (in output mode). Indicated by
status.
**Indicated by
0.0 ... 3000.0 s
114.18 DI2 OFF delay
0.00 ... 3000.00 s
114.18 DIO2 OFF delay
0.0 ... 3000.0 s
114.19 DIO3 configuration
Input
Output
114.19 AI supervision
function
No action
Fault
Warning
Description
(Visible when 114.01 Module 1 type
Selects a signal to be connected to digital input/output DIO2
when parameter
For the available selections, see parameter
output source.
(Visible when 114.01 Module 1 type
Defines the activation delay for digital input DI2. See
parameter 114.12 DI1 ON
Activation delay for DI2.
(Visible when 114.01 Module 1 type
Defines the activation delay for digital input/output DIO2.
t
On
114.06 DIO delayed status.
Activation delay for DIO2.
(Visible when 114.01 Module 1 type
Defines the deactivation delay for digital input DI2. See
parameter 114.12 DI1 ON
Deactivation delay for DI2.
(Visible when 114.01 Module 1 type
Defines the deactivation delay for digital input/output DIO2.
See parameter
Deactivation delay for DIO2.
(Visible when 114.01 Module 1 type
Selects whether DIO3 of the extension module is used as a
digital input or output.
DIO3 is used as a digital input.
DIO3 is used as a digital output.
(Visible when 114.01 Module 1 type
Selects how the DC/DC converter reacts when an analog
input signal moves out of the minimum and/or maximum
limits specified for the input.
The inputs and the limits to be observed are selected by
parameter 114.20 AI supervision
No action taken.
DC/DC converter trips on
DC/DC converter generates an
warning.
= FIO-01
114.14 DIO2 configuration
= FDIO-01)
delay.
= FIO-01
t t
Off On
= FDIO-01)
delay.
= FIO-01
114.17 DIO2 ON delay.
= FIO-01)
= FIO-11
selection.
8E06 AI supervision.
AE67 AI supervision
Def/FbEq16
or FIO-11) Not energized
is set to Output.
114.11 DIO1
0.00 s
10 = 1 s
or FIO-11) 0.0 s
1
0
1
0
Time
t
Off
114.05 DIO
10 = 1 s
0.00 s
10 = 1 s
or FIO-11) 0.0 s
10 = 1 s
Input
0
1
or FAIO-01) No action
0
1
2